30 Liter Pilot Plant Reactor - Made of Borosilicate Glass

All of the glass adopts Pyrex. Titanium alloy mechanical sealing. Four-leaf and double-layer agitators. High quality motor

  30 Liter Pilot Plant Reactor

                                 - Made of Borosilicate Glass

Specifications of Reactor:

Volume	30 Liter
Glassware Material	Borosilicate Glass
Frame Material	SUS304
Diameters of Vessel Lid (mm)	50#+40#+40#+34#+24#
Stirring Power	90W
Speed Adjustment	Frequency Conversion
Rotary Speed	20~600 rpm
Reaction Temperature Range	-60°C -250°C
Thermometer Type	PT100 Electrical Thermometer
Seal Type	Titanium alloy mechanical sealing
Reachable Vacuum Level	0.098MPa
Stirring Head Type	Propeller,PTFE
Stirring Bar Material	Stainless Steel with PTFE, covered with PTFE from bottom to top
Discharge Valve	PTFE Propel (Teflon)
Discharger Position	Bottom
Dimensions	61*41*190 cm
Packing Size	167*55*62 cm
Packing Weight	91 kg
Power	220V/5A
Extra Component (Optional)	safety insulation cover

 

Structure of Reactor:

Detail informations:

1. The electric motor:

The electric motor is with the centre adjustment.It is a high quality motor,it can work for 168 hours without stop,just also work normally under the condition of strong acid,strong alkali or when its temperature is 90 centigrade.It belongs to VVVF,AC induction motor.

Speed constant,no brush,no sparks,security and stable.

Functions of the fixed parts under the electric motor is great.It is easy to adjust the balance,it can solve the shaking problem when the reactor is working,expecially under the high speed rotation condition.

2. LCD frequency converter

3. The elbow and the condenser:

The elbow is used to connect with vacuum pump.

The condenser used to condense a substance from its hot vapor to its liquid state,it consistes of a large glass tube containing a smaller glass tube running its entire length,within which the hot fluids pass.

4.The flask:

It is used to collect liquid that flow down from the condenser,and also could connect with a bigger collect bottle. 

5. The head of reactor:

The thermowell adoptsPT100 temperature sensor,it provides more accurate datas.

The seal of stirring is titanium alloy mechanical sealing.So the sealing is more stability,the stirring is more evenly,the rusting is disappearance.There is a fluororubber seal between titanium alloy circle and PTFE.Each glass reactor must through the strict tests before leaving factory,the sealing performance is 0.098Mpa.

6. The stirring shaft and the agitator:

The stirring shaft is made of high quality 304 stainless steel,and covered with PTFE from bottom to top.The paddle is made of four-leaf and double deck,which makes the mixing process more completely and equally.

7. The bottom outlet:

About the bottom outlet,we use aluminium ring flange for fixing.It is flange mouth and PTFE valve,fixed by aluminum flange,and fastened with metal screws.There is no dead corner in the container,so it is easy to outlet the reaction material.

Operating principle:

1 The inner layer is used to inject reaction material.

2 The constant temperature fluid,which be injectted in the jacketed glass,can be replaced by hot solution or cooling liquid,to do cycle heating or cooling reaction.

3 The reaction material can be stirred by stirring rod.

4 The reaction process happened in the vessel.

5 The evaporation and backflow of reaction material can be controlled.

6 When the reaction is completed,the reaction material can be released from the discharge port,which is in the bottom of the reactor.The operation is quite convenient.

Features: 

1 All of the glass adopts Pyrex,which can ensure good chemical and physical properties.

2 If hot oil cycles through the jacketed glass,heating experiments could be done.On the contrary,low temperature experiments can be done if the circulated fluid is cold.

3 The heat of reaction could be taken away quickly through water,which cycling in the jacketed glass.

4 Large mouth design makes it easy to clean,standard mouth makes the assembly and backflow could be chose.

5 It can be used as distillation syntheses device.

6 Titanium alloy mechanical sealing.So the sealing is more stability,the stirring is more evenly,the rusting is disappearance.There is a fluororubber seal between titanium alloy circle and PTFE.Each glass reactor must through the strict tests before leaving factory,the sealing performance is 0.098Mpa.

7 The temperature is measured by PT100 electronic.

8 LCD display makes it is easier and more convenient to measure temperature.

30 Liter Pilot Plant Reactor - Made of Borosilicate Glass